Tile in Colorado Springs, CO

ACG CONSTRUCTION
ACG CONSTRUCTION
5.0
location
Serves Colorado Springs, CO
calendar
7 years in business
For starters I only advertise for tile and popcorn removal because it seems like it gets done but not done well. A little bit about myself. I started in residential construction about 20 yrs ago. I do all my own work. I do not sub out my work. I started working for myself because most general contractors seem like they only care about money and not the quality of work, the customer, or their subs. I provide peace of mind as well as a service. Communication is key to what I do. Knowing the needs and expectations of a customer makes the process easier, faster, less expensive, and the end product exactly what the customer wants. I carry million dollar liability insurance. My popcorn removal gets done correctly. I put up plastic from floor to ceiling, capturing all the dust and debris. After scraping, I screw the ceiling back up in all the low spots, I mud and sand all the screw holes, seams, butt joints, along the ceiling where it meets the walls, caulk the corners where the walls and ceilings meet, I do more work in my prep so dont have to water my texture down to hide all the flaws. It also keeps the ceilings from cracking 6 months down the road. All that is needed because under the popcorn they only run one coat of joint compound, its left unfinished when the popcorn is sprayed. A cleaner comes and cleans when im done. When the plastic gets pulled to be thrown away dust always kicks up. Its not a lot. I do it as a courtesy. It basically comes out to about $4-5 a square foot. And that includes popcorn removal, patching, sanding, primer and paint. Its myself and my helper. its gets done in about a week. I also specialize in bathtub to shower conversions/tile. For the past 5 years i've mainly done popcorn removal and tile. Custom showers/ tub to shower conversions, and bathroom remodles. But I've been doing tile for over 10 yrs. I do custom showers, tub surrounds, floors, backsplashes, fireplace surrounds, patios, heated floors etc. I use leveling kits on all my large format tile. They keep everything perfectly level and even. I file and buff all my cuts, it makes them perfectly smooth. I can build a custom shower pans or use the schulter system kits. My showers are second to none. I take the time to trim everything out in metal trim. It hides all of the cut ends of the tile and keeps everything looking clean. Or i can miter the corners. (that costs more, takes more time) i trim out the sides, curb, shampoo niche, anything where there's a to cut edge to hide. Or I can trim them out in any style preferred bullnose etc.. Tub surround start at $2000. Thats for demo, labor and materials. Minus tile and grout. Room remodels, bathrooms, free standing tubs, basements, kitchenettes, wet bars, drywall, patching, matching textures, installing doors(interior, exterior, closet, pocket), installing locks, faucets, drains, shower hot/cold valves, toilets, laminate flooring , laminate vinyl plank flooring, replacing switches, outlets, light fixtures, ceiling fans, etc. I work with a licensed electrician for any electrical that may need a permit. Anything structural or that changes the layout of a home needs a permit. I can get your project done on time and within budget. I also work for a number of realtors, investors, and property management companies. Most of my customers are repeat customers. I've got references if needed. I use thumbtack so I'm not dependent upon any one person, ie; general contractors. Also to build my customer base of homeowners. Tile is best picked and ordered at least 2 weeks in advance. I consider myself an artisan and I take pride in what I do. I use the latest materials available, I clean and seal the grout/tile, my shower pans pitch correctly, they dont puddle and most importantly they dont leak. MY SHOWERS PASS CODE AND INSPECTION! When it comes to wet areas and tile you get what you pay for! I redo a few new installs each year. I dont charge extra if you're located farther south. Thank you.
View Details
ACG CONSTRUCTION
ACG CONSTRUCTION
4.5
location
Serves Colorado Springs, CO
calendar
7 years in business
For starters I only advertise for tile and popcorn removal because it seems like it gets done but not done well. A little bit about myself. I started in residential construction about 20 yrs ago. I do all my own work. I do not sub out my work. I started working for myself because most general contractors seem like they only care about money and not the quality of work, the customer, or their subs. I provide peace of mind as well as a service. Communication is key to what I do. Knowing the needs and expectations of a customer makes the process easier, faster, less expensive, and the end product exactly what the customer wants. I carry million dollar liability insurance. My popcorn removal gets done correctly. I put up plastic from floor to ceiling, capturing all the dust and debris. After scraping, I screw the ceiling back up in all the low spots, I mud and sand all the screw holes, seams, butt joints, along the ceiling where it meets the walls, caulk the corners where the walls and ceilings meet, I do more work in my prep so dont have to water my texture down to hide all the flaws. It also keeps the ceilings from cracking 6 months down the road. All that is needed because under the popcorn they only run one coat of joint compound, its left unfinished when the popcorn is sprayed. A cleaner comes and cleans when im done. When the plastic gets pulled to be thrown away dust always kicks up. Its not a lot. I do it as a courtesy. It basically comes out to about $4-5 a square foot. And that includes popcorn removal, patching, sanding, primer and paint. Its myself and my helper. its gets done in about a week. I also specialize in bathtub to shower conversions/tile. For the past 5 years i've mainly done popcorn removal and tile. Custom showers/ tub to shower conversions, and bathroom remodles. But I've been doing tile for over 10 yrs. I do custom showers, tub surrounds, floors, backsplashes, fireplace surrounds, patios, heated floors etc. I use leveling kits on all my large format tile. They keep everything perfectly level and even. I file and buff all my cuts, it makes them perfectly smooth. I can build a custom shower pans or use the schulter system kits. My showers are second to none. I take the time to trim everything out in metal trim. It hides all of the cut ends of the tile and keeps everything looking clean. Or i can miter the corners. (that costs more, takes more time) i trim out the sides, curb, shampoo niche, anything where there's a to cut edge to hide. Or I can trim them out in any style preferred bullnose etc.. Tub surround start at $2000. Thats for demo, labor and materials. Minus tile and grout. Room remodels, bathrooms, free standing tubs, basements, kitchenettes, wet bars, drywall, patching, matching textures, installing doors(interior, exterior, closet, pocket), installing locks, faucets, drains, shower hot/cold valves, toilets, laminate flooring , laminate vinyl plank flooring, replacing switches, outlets, light fixtures, ceiling fans, etc. I work with a licensed electrician for any electrical that may need a permit. Anything structural or that changes the layout of a home needs a permit. I can get your project done on time and within budget. I also work for a number of realtors, investors, and property management companies. Most of my customers are repeat customers. I've got references if needed. I use thumbtack so I'm not dependent upon any one person, ie; general contractors. Also to build my customer base of homeowners. Tile is best picked and ordered at least 2 weeks in advance. I consider myself an artisan and I take pride in what I do. I use the latest materials available, I clean and seal the grout/tile, my shower pans pitch correctly, they dont puddle and most importantly they dont leak. MY SHOWERS PASS CODE AND INSPECTION! When it comes to wet areas and tile you get what you pay for! I redo a few new installs each year. I dont charge extra if you're located farther south. Thank you.
View Details
Maxar handyman service
Maxar handyman service
4.5
location
Serves Colorado Springs, CO
calendar
3 years in business
Welcome to the dependable hands of insured Maxar handyman service, your trusted local handyman in the Colorado Springs. With a passion for craftsmanship and a commitment to customer satisfaction, I bring a wealth of experience to every project, big or small. 🔧 Home Repairs: From pictures hanging to tile projects , count on me to handle a variety of home repairs with precision and efficiency. 🔨 Carpentry: Transform your space with custom carpentry work, whether it's building shelves, framing, or installing new doors. 🔩 Maintenance: Regular maintenance is key to preventing bigger problems. Let me keep your property in top-notch condition.
View Details
Kingdom Painting and Home Repairs LLC
Kingdom Painting and Home Repairs LLC
4.5
location
Serves Colorado Springs, CO
calendar
29 years in business
I have been in business for over 25 years delivering excellent craftmanship and customer service. Integrity and professionalism are top priority. We give free estimates and every proposal written will describe work to be done and product to be used. $300 off complete Interior or Exterior paint job. 10% off any handyman services.
View Details
Tile Mint Co
Tile Mint Co
4.5
location
Serves Colorado Springs, CO
calendar
2 years in business
"At Tile Mint Co., we’ve spent over 10 years perfecting the art of tile and stone care. From deep tile and grout cleaning to stone floor polishing, grout repair, and even tile installation, we treat every project with expert skill and genuine pride. We love restoring surfaces to their best and take the time to do the job right. If you want lasting results from a team that cares, we’re here to help."
View Details
More Service

Q&A

1. What types of tile are commonly used in homes?

unfold fold
Common types of tile include ceramic, porcelain, natural stone (like marble or slate), glass, and quarry tiles, each with different styles and durability.

2. Where can tile be installed?

unfold fold
Tiles can be installed on floors, walls, backsplashes, countertops, and even outdoor areas, depending on the tile type and intended use.

3. How do I maintain and clean tile surfaces?

unfold fold
Regular sweeping and mopping with mild cleaners are recommended. Sealing natural stone tiles periodically helps protect against stains and moisture.

4. How much does tile installation typically cost?

unfold fold
Costs vary based on tile type, area size, and labor, generally ranging from $5 to $15 per square foot including installation.

5. Can tile increase my home’s value?

unfold fold
Yes, well-chosen and professionally installed tile can enhance aesthetic appeal and durability, potentially increasing home value.

Favorites

Here is a brief description text of the drawer.